|
Mercedes W124since 1985-1995 of releaseRepair and car operation |
|
W124 Mercedes - Governing bodies and control devices Combination of devices Control bulbs Start and engine stop Instructions on driving Heating and ventilation Examples of adjustment of temperature and distribution of a stream of air Independent system of heating Air central air Automatic central air of air Keys Closing and blocking of locks of a door Blocking of the lock of a back door from children Manual adjustment of provision of forward sitting Adjustment of provision of forward sitting with the electric drive Adjustment of provision of a steering wheel Adjustment of provision of the lower part of a back of forward sitting Armrest of forward sitting Armrest of back sitting Head restraint of back sitting Adjustment of head restraints Heater of back glass Seat belts Safety airbag Blocking steering column / lock of ignition Lighting switch Proof-reader of light of headlights Multipurpose switch of a steering column Rear-view mirrors Lighter Sun-protection peaks Heater of back glass Internal lighting Hatch Management of electric window regulators Parking brake Mechanical transmission Automatic transmission Switch of an operating mode of an automatic transmission System cruise control Drive on four wheels (4 MATIC) Cowl System of production of the fulfilled gases Car identification + Weekly checks and service in a way Main sizes Control sizes + MAINTENANCE + 2. Maintenance (diesel engines) + ENGINE + 4. Repair of 6-cylinder petrol SOHC engines + 5. Repair of 6-cylinder petrol DOHC engines + 6. Repair of the diesel engine established in the car + 7. Major maintenance of engines + COOLING SYSTEM + FUEL SYSTEM + 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC) + 11. System of injection of BOSCH HFM fuel + 12. Fuel system of diesel engines + 13. Fuel system of diesel engines + SYSTEMS OF START, IGNITION + 15. System of ignition of 4-cylinder petrol engines + 16. System of ignition of four-cylinder petrol engines + PRESTARTING HEATING + TRANSMISSION + 19. Mechanical transmission + 20. Automatic transmission + POWER SHAFTS + BRAKE SYSTEM + SUSPENSION BRACKET + BODY + ELECTRIC EQUIPMENT + CHECK OF MALFUNCTIONS |
Start and engine stop
Before start Before start of the engine fix the car motionlessly for what tighten the parking brake. On models with a mechanical transmission establish the gear shifting lever in neutral situation, and on models with an automatic transmission establish the selector lever in situation P or N. The temperature of external air is lower 0 ° With Smoothly press coupling and accelerator pedals. Turn a key in the ignition lock to the right against the stop and after start of the engine release a key, and then smoothly release an accelerator pedal. It is not recommended to interrupt process of start of the engine, as at the cold engine, it is possible that the engine in repeated attempt will not be started. After high operational power setting, for example, after driving in mountain conditions, do not switch off it at once after a stop, and let's to it work within at least 1 minute on single turns that there was no stagnation of heat. Instructions As on the lock of ignition there is a blocking for an exception of restart of the working engine, before restart of the engine establish a key in the ignition lock in situation 0. After engine start first of all pay attention to pressure of oil. Do not increase turns of the cold engine while pressure of oil will not correspond to the demanded. If at start of the engine the control bulb of preliminary heating of the diesel engine does not light up, address on service station. If the car is constantly maintained in regions where air temperature is lower –18 ° With, it is recommended to address on Mercedes-Benz service station and to establish the block of heating of cooling liquid. |
|