Prevention
The electronic control device (ECU) has the details sensitive to a static electricity therefore at a detachment электричес ky sockets from the block (ECU) do not touch by hands or instruments of contacts of the socket as thus it is possible to damage ECU block elements. At work with the ECU block remove from a body a static electricity, having concerned the earthed metal subjects. Disconnect electric sockets from the ECU block only for a while, necessary for repair.
Removal
PERFORMANCE ORDER |
1. The ECU block is located behind a partition of a motor compartment at the accumulator. |
2. Remove a weight wire from the accumulator. |
3. Press spring clamps and disconnect the multicontact electric socket from the electronic control device. |
4. Take a fixing core, unscrew screws and remove the block of the electronic control device. On models with anti-blocking system previously it is necessary to remove the control unit anti-blocking system. |
|
Installation
PERFORMANCE ORDER |
1. Installation is made in sequence, return to removal. |
|
|