Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
- 11. System of injection of BOSCH HFM fuel
   11.2. General information
   11.3. Accelerator cable
   11.4. Air filter
   11.5. Casing of the air filter
   11.6. Fuel filter
   11.7. Fuel level sensor
   11.8. Fuel pump
   11.9. Fuel tank
   11.10. Throttle case
   11.11. Inlet collector
   - 11.12. Elements of system of injection of BOSCH HFM fuel
      11.12.2. The sensor of temperature of cooling liquid
      11.12.3. Lambda sensor
      11.12.4. Electronic control device (ECU)
      11.12.5. Fuel nozzles and fuel highway
      11.12.6. Regulator of pressure of fuel
   11.13. Pressure removal in fuel system
   11.14. Adjustment of turns of idling and the contents WITH in exhaust gases
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






11.12.5. Fuel nozzles and fuel highway

Removal

Fuel highway

 

A–sealing ring of a fuel nozzle;
B–bolts of fastening of the fuel highway;
C–returnable fuel hose;
D–a submitting fuel hose;
E–vacuum hose of the case of a throttle;
F–electric socket of a fuel nozzle;
G–regulator of pressure of fuel

Fuel highway and fuel nozzles
A–case of a fuel nozzle;
B–top sealing ring of a fuel nozzle;
C–bottom sealing ring of a fuel nozzle;
D–fastening bracket;
E–fuel highway;
F–element of fastening of a fuel nozzle

PERFORMANCE ORDER
1. Remove pressure in fuel system.
2. Remove a weight wire from the accumulator.
3. Weaken the collars, fixing a hose connecting a measuring instrument of a stream of air and an inlet collector, and remove a hose located over a head of the block of cylinders.
4. Unscrew connecting nuts and disconnect submitting and returnable топливопроводы from the fuel highway (see fig. Fuel highway).
5. Disconnect a vacuum hose from a regulator of pressure of fuel.
6. Disconnect electric sockets from fuel nozzles. Release a plait of wires from fastening brackets on the fuel highway.
7. Unscrew bolts of fastening and remove the fuel highway together with fuel nozzles from an inlet collector. Remove the bottom sealing rings from fuel nozzles.
8. Take brackets of fastening and remove fuel nozzles from the fuel highway. Remove the top sealing rings from fuel nozzles (see fig. Fuel highway and fuel nozzles).

Installation

PERFORMANCE ORDER
1. At installation of fuel nozzles check that its fixing bracket was combined with the corresponding ledge.
2. Before installation of a fuel nozzle establish a new top sealing ring, previously having greased it with a thin butter layer (see fig. Elements of a being self-leveled back suspension bracket).
3. Installation of the fuel highway with fuel nozzles is made in sequence, return to removal taking into account the next moments.
4. At installation it is recommended to replace the bottom sealing rings of fuel nozzles.
5. At installation apply a thin film engine oil on the bottom sealing rings of fuel nozzles.
6. Connect fuel hoses to the fuel highway. Thus keep in mind that the toplivopodayushchy hose fastens to the bottom branch pipe of the fuel highway.
7. Tighten bolts of fastening of the fuel highway to an inlet collector the demanded moment.