Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
- 12. Fuel system of diesel engines
   12.2. General information
   12.3. Air filter
   12.4. Fuel level sensor
   12.5. Fuel tank
   12.6. Inlet collector
   12.7. Accelerator cable
   12.8. Fuel pump of a high pressure
   12.9. The pumping-up fuel pump
   12.10. Mechanism of adjustment of the moment of injection, asterisk of the fuel pump
   12.11. Moment of injection of the fuel pump of a high pressure
   12.12. Fuel nozzles
   12.13. Electronic control system of turns of idling (ELR)
   12.14. Electronic anti-detonation system ARA
   12.15. Electronic control system of the diesel engine
   12.16. System of protection of the engine from an overload
   12.17. Fuel thermostat
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






12.17. Fuel thermostat

GENERAL INFORMATION

The fuel thermostat if necessary directs fuel before giving it to the fuel pump via the heat exchanger established in system of cooling. It improves start and operation of the engine at low temperatures of air.

Removal

PERFORMANCE ORDER
1. The fuel thermostat fastens bolts to an arm near the fuel pump of a high pressure.
2. Remove a weight wire from the accumulator.
3. Using clips, press the fuel hoses connected to the fuel thermostat. Weaken collars and remove hoses from the fuel thermostat.
4. Unscrew bolts and remove the fuel thermostat from an arm.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.