Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
- SYSTEMS OF START, IGNITION
   14.2. General information
   14.3. Rules of care of the accumulator
   14.4. Accumulator check
   14.5. Battery charging
   14.6. Accumulator
   14.7. Charging system
   14.8. Generator
   14.9. Replacement of the block of a regulator of tension and shchetkoderzhatel
   14.10. System of start of the engine
   14.11. Starter
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






14.5. Battery charging

GENERAL INFORMATION

The battery charging should be made, when the accumulator is removed from the car.

Battery charging make the charging current making 0,1 from capacity of the accumulator and until the electrolit density in the accumulator will not raise within 4 hours.

Use of big currents for a fast battery charging is not recommended, since in this case there can be a buckling of plates because of an overheat.

During a battery charging the temperature of electrolit should not exceed 37,8 ° Page.