Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
- PRESTARTING HEATING
   17.2. General information
   17.3. Control unit glow plugs
   17.4. Glow plugs
   17.5. The sensor of temperature of cooling liquid
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






17.5. The sensor of temperature of cooling liquid

Removal

PERFORMANCE ORDER
1. The sensor of temperature of cooling liquid is located on the left side of a head of the block of cylinders on 6-cylinder engines or on the left side of the water pump on 4-and 5-cylinder the engine.
2. Removal of the sensor of temperature of cooling liquid make on the cold engine. Remove a weight wire from the accumulator.
3. Merge a part of cooling liquid from cooling system.
4. Disconnect the electric socket from the sensor of temperature of cooling liquid.
5. Unscrew the sensor of temperature of cooling liquid from a head of the block of cylinders or the water pump and remove sensor laying.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Add cooling liquid in cooling system.