Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
- 19. Mechanical transmission
   19.2. General information
   19.3. Oil replacement in a transmission
   19.4. Gear shifting mechanism
   19.5. Replacement of sealing rings
   19.6. Switch of light of a backing
   19.7. Removal and transmission installation
   19.8. Transmission repair
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






19.6. Switch of light of a backing

Check

PERFORMANCE ORDER
1. Lamps of a backing join the switch of plunzherny type located in a back part of knot of levers of a choice of transfers under the central console. If backing lamps do not work, first of all check integrity of the fuse.
2. For access to the switch of light of a backing remove decorative furnish from the central console.
3. For check of serviceability of the switch of light of a backing disconnect from it electric sockets and connect to switch contacts an ohmmeter. Check, whether switch contacts at inclusion of transfer of a backing become isolated. If contacts of the switch do not become isolated, means, the switch is faulty and it is necessary to replace it.

Removal

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. For access to the switch of light of a backing remove a decorative slip from the central console.
3. Remove the switch from an arm and disconnect from it electric sockets.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.