Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
- MAINTENANCE
   1.2. Periodicity of service
   1.3. Maintenance
   + 1.4. Each 9 000 km
   - 1.5. Each 18 000 km
      1.5.2. Check of elements of system of a being self-leveled back suspension bracket
      1.5.3. Check of level of oil in an automatic transmission
      1.5.4. Check of tightness of hoses and liquid effluence
      + 1.5.5. Check and replacement of an auxiliary belt of a drive
      1.5.6. Check of system of a koditsionirovaniye of air
      1.5.7. Check of level of oil in the piston shock-absorber (STROMBERG)
      + 1.5.8. Check of turns of idling and quality of a fuel mix
      1.5.9. Check of a forward suspension bracket and steering
      1.5.10. Shock-absorber check
      1.5.11. Check of a protective cover of a power shaft
      1.5.12. Check of forward brake shoes
      1.5.13. Check of back brake shoes
      1.5.14. Check of an exhaust system
      1.5.15. Check of level of oil in a mechanical transmission
      1.5.16. Check of level of oil in reverse main gear
   1.6. Each 58 000 km
   1.7. Each 118 000 km or 1 time in 4 years
   1.8. Each 12 months
   1.9. Each 3 years
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






1.5.11. Check of a protective cover of a power shaft

GENERAL INFORMATION

Check of a condition of a protective cover of the hinge of equal angular speeds of a power shaft

PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports.
2. Rotating a back wheel, examine rubber protective covers of hinges of equal angular speeds, compressing them for disclosure of bends. Check them on existence of cracks which can lead to leakage of greasing, and also to penetration in water and dirt (see drawing).
3. Also check a condition of fixing collars, examine covers of internal hinges and casings on the other hand. If any damage is found, it is necessary to replace a protective cover immediately.
4. At the same time check the general condition of hinges of equal angular speeds, holding a shaft and at the same time trying to turn wheels. Repeat attempt, holding the internal hinge of equal angular speeds and turning a shaft. Any appreciable люфт points to wear of the hinge, wear in grooves of a shaft or unscrewing of a lock nut of a shaft.