Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
- MAINTENANCE
   1.2. Periodicity of service
   1.3. Maintenance
   + 1.4. Each 9 000 km
   - 1.5. Each 18 000 km
      1.5.2. Check of elements of system of a being self-leveled back suspension bracket
      1.5.3. Check of level of oil in an automatic transmission
      1.5.4. Check of tightness of hoses and liquid effluence
      + 1.5.5. Check and replacement of an auxiliary belt of a drive
      1.5.6. Check of system of a koditsionirovaniye of air
      1.5.7. Check of level of oil in the piston shock-absorber (STROMBERG)
      + 1.5.8. Check of turns of idling and quality of a fuel mix
      1.5.9. Check of a forward suspension bracket and steering
      1.5.10. Shock-absorber check
      1.5.11. Check of a protective cover of a power shaft
      1.5.12. Check of forward brake shoes
      1.5.13. Check of back brake shoes
      1.5.14. Check of an exhaust system
      1.5.15. Check of level of oil in a mechanical transmission
      1.5.16. Check of level of oil in reverse main gear
   1.6. Each 58 000 km
   1.7. Each 118 000 km or 1 time in 4 years
   1.8. Each 12 months
   1.9. Each 3 years
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






1.5.6. Check of system of a koditsionirovaniye of air

GENERAL INFORMATION

Arrangement of an observation port for check of level of liquid in air central air

PERFORMANCE ORDER
1. The sensor of pressure of central air of air is located sideways a nutritious tank.
2. Switch off ignition and disconnect the electric socket from the top part of the sensor of pressure.
3. Start the engine in a mode of idling and include system кондициониро vaniye on the dashboard.
4. Wipe the observation port located sideways of a nutritious tank (see drawing).
5. Connect the electric socket to the sensor of pressure and watch an observation port. As a result of it the electromagnetic coupling and coolant level in an observation port will turn on should raise. The coolant seen in an observation port should be without air vials.
If coolant level in air central air too low or too low pressure in system, the sensor of pressure prevents inclusion of central air of air. In this case it is necessary to make repair of central air of air in a specialized workshop.