Mercedes W124

since 1985-1995 of release

Repair and car operation


W124 Mercedes
+ Governing bodies and control devices
- MAINTENANCE
   1.2. Periodicity of service
   1.3. Maintenance
   + 1.4. Each 9 000 km
   + 1.5. Each 18 000 km
   1.6. Each 58 000 km
   1.7. Each 118 000 km or 1 time in 4 years
   1.8. Each 12 months
   1.9. Each 3 years
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS





1.8. Each 12 months

Replacement of brake liquid

Operation on replacement of brake liquid is similar to operation of pumping of brakes except that the tank of brake liquid should be released from old brake liquid.

PERFORMANCE ORDER
1. Open the first union of pumping and swing a brake pedal until old brake liquid leaves the main brake cylinder. Add brake liquid to a label a move in a tank and pump over once again before emergence in the union of pumping of new brake liquid then screw up the pumping union. Similarly pump over brake contours of other wheels.
2. At carrying out pumping do not allow lowering of level of brake liquid in a tank below min label. Otherwise air can get to hydraulic brake system.
3. Check reliability of a tightening of unions of pumping. Establish on them dustproof caps and wipe traces of brake liquid.
4. Check action of brake system at car movement on small speed.