Mercedes W124

since 1985-1995 of release

Repair and car operation


W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
- BRAKE SYSTEM
   22.2. General information
   22.3. Pumping of hydraulic brake system
   22.4. Brake pipelines and hoses
   + 22.5. Replacement of forward brake shoes
   22.6. Replacement of back brake shoes
   22.7. Forward brake disk
   22.8. Back brake disk
   22.9. Forward brake support
   + 22.10. Support repair
   22.11. Back brake support
   22.12. Main brake cylinder
   22.13. Vacuum amplifier of brakes
   22.14. Unilateral valve of the vacuum amplifier of brakes
   22.15. Adjustment of the parking brake
   22.16. Brake shoes of the parking brake
   22.17. Pedal of the parking brake
   22.18. Cables of the parking brake
   22.19. Stoplight switch
   22.20. Anti-blocking system (ABS)
   + 22.21. Elements of anti-blocking system
   22.22. The vacuum pump on models with diesel engines
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






22.18. Cables of the parking brake

Removal

Forward cable

Prevention

At installation of a forward cable of the parking brake it is necessary to use a new bolt of fastening of a cable to a compensatory plate.

Arrangement of details of the compensatory mechanism of the parking brake
1–regulator arm;
2–basic arm;
3–adjusting bolt;
4–a directing arm;
5–intermediate lever;
6–compensatory plate;
7–bracket of fastening of a spring;
8–back cable of the parking brake;
9–returnable spring;
10-bracket of fastening of a cover of a cable;
11-arm;
12-consolidation;
13-forward cable of the parking brake

PERFORMANCE ORDER
1. Remove a seat of the driver and the central console.
2. Disconnect a cable from a pedal of the parking brake.
3. Disconnect a returnable spring and remove it from a compensatory plate (see fig. Arrangement of details of the compensatory mechanism of the parking brake).
4. Unscrew a bolt, fixing a back part of a forward cable to a leveling plate. At installation it is necessary to use a new bolt.
5. Note an arrangement of a forward cable of the parking brake, take it from brackets of fastening and clamps and remove it.

Back cable

Prevention

At installation of a back cable it is necessary to use a new bolt of fastening of a cable to a fixing element of a nave.

Arrangement of a bolt of fastening of a back part of the parking brake to a fixing element of a back nave

Arrangement of a bracket of fastening of a cover of a back cable of the parking brake

PERFORMANCE ORDER
1. Remove brake shoes of the parking brake, the corresponding wheel and disconnect the cable end from the sliding mechanism.
2. Unscrew a bolt, fixing a cable cover to a nave, and remove a cable from a back part of a brake board (see fig. An arrangement of a bolt of fastening of a back part of the parking brake to a fixing element of a back nave).
3. Disconnect a returnable spring and remove it from a bracket of fastening of compensation of this plate.
4. Remove a bracket, a fixing forward part of a cover of a cable of the parking brake to an arm on the body bottom. Disconnect a cable from a compensatory plate and take it from under the car (see fig. Arrangement of a bracket of fastening of a cover of a back cable of the parking brake).

Installation

Forward cable

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Use a new bolt for fastening of a back part of a cable to a leveling plate. Adjust operation of the parking brake.

Back cable

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. For cable fastening to a fixing element of a nave use a new bolt. Adjust the parking brake.