1. Remove a weight wire from the accumulator. |
2. Unscrew screws and uncover the hydraulic device. |
3. Dress a pure transparent hose on the union of pumping of the hydraulic device (SP label) and the second end of a hose establish in a vessel. Unscrew the union of pumping and merge brake liquid in a vessel. |
4. For reduction of losses of brake liquid press a hose connecting the pump to a popolnitelny tank of the main brake cylinder. |
5. Wipe area about a place of connection of a hose of the pump and connections of tubes. Unscrew connecting nuts and, being careful, take tubes from the pump. Also disconnect from the pump a hose. Close the ends of tubes and a hose jams. |
6. Disconnect from the pump the electric socket, then remove the pump from an arm and take from a motor compartment. |