1. Remove a weight wire from the accumulator. |
2. Unscrew screws and uncover the hydraulic device. |
3. Dress a pure transparent hose on the union of pumping of the hydraulic device (SP label) and the second end of a hose establish in a vessel. Unscrew the union of pumping and merge brake liquid in a vessel. |
4. Disconnect tubes of the accumulator of pressure from the basis of the hydraulic device. |
5. Tighten the parking brake, then lift a forward part of the car and fix on supports. Remove the left forward wheel. |
6. Unscrew screws and remove protection of a wing from under an arch of the left wing. |
7. Unscrew the nuts, pressure fixing the accumulator to an arm, then, being careful, remove the pressure accumulator together with tubes. |