Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
- BRAKE SYSTEM
   22.2. General information
   22.3. Pumping of hydraulic brake system
   22.4. Brake pipelines and hoses
   + 22.5. Replacement of forward brake shoes
   22.6. Replacement of back brake shoes
   22.7. Forward brake disk
   22.8. Back brake disk
   22.9. Forward brake support
   + 22.10. Support repair
   22.11. Back brake support
   22.12. Main brake cylinder
   22.13. Vacuum amplifier of brakes
   22.14. Unilateral valve of the vacuum amplifier of brakes
   22.15. Adjustment of the parking brake
   22.16. Brake shoes of the parking brake
   22.17. Pedal of the parking brake
   22.18. Cables of the parking brake
   22.19. Stoplight switch
   22.20. Anti-blocking system (ABS)
   + 22.21. Elements of anti-blocking system
   22.22. The vacuum pump on models with diesel engines
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






22.4. Brake pipelines and hoses

GENERAL INFORMATION

Connection of a brake tube and the brake hose, fixed on a car body

Brake tubes are applied to transfer of brake liquid from the main brake cylinder to wheel brake cylinders. Connections of tubes with brake cylinders and switching centers are made by konusny couplings. The ends of tubes are pressed out and have a cone-shaped form for the corresponding size of konusny carving openings in brake cylinders or switching centers.

PERFORMANCE ORDER
1. Before obzhatiy the ends of tubes the lock nut which after a vvinchivaniye of a cone-shaped surface in the konusny basis of a carving opening presses is put on them and pressurizes a tube.
2. Brake hoses carry out mobile communications between mobile and motionless parts of the car. For reduction of losses of brake liquid at removal of working brake cylinders clips for a perezhatiya of brake hoses are used.
3. At installation of a new brake tube or a brake hose be convinced that they are densely fixed in arms and are at sufficient distance from moving or heating-up details.
4. Upon termination of installation check level of brake liquid in the main brake cylinder and add it if necessary. Remove air from brake system and carefully check work of brakes before beginning car operation.