Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
- BRAKE SYSTEM
   22.2. General information
   22.3. Pumping of hydraulic brake system
   22.4. Brake pipelines and hoses
   + 22.5. Replacement of forward brake shoes
   22.6. Replacement of back brake shoes
   22.7. Forward brake disk
   22.8. Back brake disk
   22.9. Forward brake support
   + 22.10. Support repair
   22.11. Back brake support
   22.12. Main brake cylinder
   22.13. Vacuum amplifier of brakes
   22.14. Unilateral valve of the vacuum amplifier of brakes
   22.15. Adjustment of the parking brake
   22.16. Brake shoes of the parking brake
   22.17. Pedal of the parking brake
   22.18. Cables of the parking brake
   22.19. Stoplight switch
   22.20. Anti-blocking system (ABS)
   + 22.21. Elements of anti-blocking system
   22.22. The vacuum pump on models with diesel engines
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






22.8. Back brake disk

GENERAL INFORMATION

Prevention

At work of brake shoes the brake dust which contains asbestos, unhealthy forms. Therefore when cleaning brake shoes do not use the compressed air and do not inhale a dust.


Check
Prevention

In need of replacement of a brake disk it is also necessary to replace and the second brake disk for ensuring uniformity of braking. At replacement of brake disks it is also necessary to replace brake shoes.


PERFORMANCE ORDER
1. Tighten the hand brake, then lift a back part of the car and fix on supports. Remove to a sootvetstvo a yushchy back wheel.
2. Establish on a bolt of fastening of a wheel a washer in thickness of 10 mm and screw in a fastening bolt in an opening bred from the opposite side of the screw of fastening of a brake disk.
3. Slowly turn a brake disk so that it could be considered from two parties. Wear of a brake disk from blocks should be in admissible limits. If there are cracks on a disk, the disk is subject to replacement.
4. Using a micrometer, measure thickness of a brake disk.
5. The indicator of hour type check palpation of a brake disk. The indicator of hour type fix in any convenient place and, turning a brake disk, define its palpation at distance of 10 mm from external edge.
6. Before check of palpation of a brake disk be convinced that the bearing of a nave is in a good condition.
7. Check a brake disk on existence of cracks, especially round openings under bolts of fastening of a wheel, and also on existence of wear or mechanical damages and, if necessary, replace it.

Removal

PERFORMANCE ORDER
1. The back brake disk acts in film in the same way, as well as a forward brake disk taking into account the following differences. For fixing of a back brake disk one adjusting pin is used. Before removal of a brake disk check that the hand brake is completely released. If the brake disk still does not act in film, take away blocks of the hand brake from a drum of a brake disk.

Installation

PERFORMANCE ORDER
1. Installation of a back brake disk is made in the same way, as well as a forward brake disk. In summary adjust operation of the hand brake.