W124 Mercedes + Governing bodies and control devices + MAINTENANCE + 2. Maintenance (diesel engines) + ENGINE + 4. Repair of 6-cylinder petrol SOHC engines + 5. Repair of 6-cylinder petrol DOHC engines + 6. Repair of the diesel engine established in the car + 7. Major maintenance of engines + COOLING SYSTEM + FUEL SYSTEM + 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC) + 11. System of injection of BOSCH HFM fuel + 12. Fuel system of diesel engines + 13. Fuel system of diesel engines + SYSTEMS OF START, IGNITION + 15. System of ignition of 4-cylinder petrol engines + 16. System of ignition of four-cylinder petrol engines + PRESTARTING HEATING + TRANSMISSION + 19. Mechanical transmission + 20. Automatic transmission + POWER SHAFTS + BRAKE SYSTEM - SUSPENSION BRACKET 23.2. General information 23.3. Bearing of a forward nave 23.4. Nave of a forward wheel 23.5. Rotary fist 23.6. Shock-absorber of a forward suspension bracket 23.7. Spring of a forward suspension bracket 23.8. Bottom lever of a forward suspension bracket 23.9. Forward stabilizer of cross-section stability 23.10. Fixing element of a back nave 23.11. Replacement of the bearing of a back nave + 23.12. Shock-absorber of a back suspension bracket 23.13. Spring of a back suspension bracket - 23.14. Levers of a back suspension bracket 23.14.2. Installation 23.15. Bottom lever of a back suspension bracket 23.16. Stabilizer of cross-section stability of a back suspension bracket 23.17. Connecting earring of the stabilizer of cross-section stability 23.18. System of a being self-leveled back suspension bracket on the Versatile person models + 23.19. Elements of a being self-leveled back suspension bracket 23.20. Steering wheel 23.21. Steering column 23.22. Lock steering column / lock of ignition 23.23. Contact group of the lock of ignition 23.24. Rubber coupling of a steering shaft 23.25. Steering transfer 23.26. Soshka of steering transfer 23.27. Replacement of the bottom sealing ring of steering transfer 23.28. Pump of the amplifier of a steering 23.29. Pumping of system of the amplifier of a steering 23.30. Steering shock-absorber 23.31. Central steering draft 23.32. Intermediate lever of a steering 23.34. Spherical hinges of cross-section steering draft 23.35. Cross-section steering draft 23.36. Corners of installation of wheels + BODY + ELECTRIC EQUIPMENT + CHECK OF MALFUNCTIONS
|
PERFORMANCE ORDER |
1. If it is at the same time necessary to remove some levers of a back suspension bracket, a jack through wooden whetstone support the bottom lever of a back suspension bracket. |
2. Lift a back part of the car and fix on supports. Remove the corresponding back wheel. |
|
The top lever defining disorder
Fastening of the top lever defining disorder
|
1–internal sharnirny bolt;
2–external sharnirny bolt;
3–adjusting plug;
4–lever; L= 314 ± 0,5 mm |
PERFORMANCE ORDER |
1. Unscrew a nut and take the sharnirny bolt, the fixing lever to a fixing element of a nave (see fig. Fastening of the top lever defining disorder). |
2. Unscrew a nut and take the sharnirny bolt, the fixing lever defining disorder of a back wheel, to the bottom frame, and take the lever from under the car. |
3. If necessary, выпрессуйте the adjusting plug from the lever from a fixing element. |
4. Check a lever condition on existence of mechanical damages. Special attention give to rubber plugs of the lever and check them on existence of cracks and aging and, if necessary, replace them. |
|
Top jet lever
Elements of fastening of the top jet lever
|
1–internal sharnirny bolt;
2–external sharnirny bolt;
3–lever; L= 247 ± 0,5 mm |
PERFORMANCE ORDER |
1. Unscrew a nut and take the sharnirny bolt, the fixing lever to a fixing element of a nave (see fig. Elements of fastening of the top jet lever). |
2. Unscrew a nut and take the sharnirny bolt, the fixing lever defining disorder of a back wheel, to the bottom frame, and take the lever from under the car. |
3. Check a lever condition on existence of mechanical damages. Special attention give to rubber plugs of the lever and check them on existence of cracks and aging and, if necessary, replace them. |
|
Bottom lever of compensation of axial pressure
Elements of fastening of the bottom lever of compensation of axial pressure
|
1–internal sharnirny bolt;
2–external sharnirny bolt;
3–adjusting plug;
4–lever; L= 314 ± 0,5 mm |
PERFORMANCE ORDER |
1. Unscrew a nut and take the sharnirny bolt, the fixing lever to a fixing element of a nave (see fig. Elements of fastening of the bottom lever of compensation of axial pressure). |
2. Unscrew a nut and take the sharnirny bolt, the fixing lever defining disorder of a back wheel, to the bottom frame, and take the lever from under the car. If necessary, выпрессуйте the adjusting plug from the lever from a fixing element. |
3. Check a lever condition on existence of mechanical damages. Special attention give to rubber plugs of the lever and check them on existence of cracks and aging and, if necessary, replace them. |
|
The bottom directing lever
Elements of fastening of the bottom directing lever
|
1–internal sharnirny bolt;
2–nut;
3–external sharnirny bolt;
4–lever; L= 245 ± 0,5 mm |
PERFORMANCE ORDER |
1. Before removal of the lever put combination labels on an internal sharnirny bolt, ekstsentrikovy washers and the bottom frame (see fig. Elements of fastening of the bottom directing lever). These labels are necessary for using at lever installation for preservation of a convergence of back wheels. |
2. Unscrew a nut, remove an ekstsentrikovy washer and take the sharnirny bolt, the fixing lever to the bottom frame. |
3. Unscrew a nut from a pin of the spherical hinge, then take the spherical hinge from a fixing element of a nave and remove the lever. At removal of a pin of the spherical hinge and a fixing element of a nave it is necessary to use a stripper. |
4. Check a plug condition on existence of wear and damages, and also check freedom of moving of the spherical hinge and a condition of its protective cover. If necessary replace the lever. |
|
|
|