Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
- SUSPENSION BRACKET
   23.2. General information
   23.3. Bearing of a forward nave
   23.4. Nave of a forward wheel
   23.5. Rotary fist
   23.6. Shock-absorber of a forward suspension bracket
   23.7. Spring of a forward suspension bracket
   23.8. Bottom lever of a forward suspension bracket
   23.9. Forward stabilizer of cross-section stability
   23.10. Fixing element of a back nave
   23.11. Replacement of the bearing of a back nave
   + 23.12. Shock-absorber of a back suspension bracket
   23.13. Spring of a back suspension bracket
   - 23.14. Levers of a back suspension bracket
      23.14.2. Installation
   23.15. Bottom lever of a back suspension bracket
   23.16. Stabilizer of cross-section stability of a back suspension bracket
   23.17. Connecting earring of the stabilizer of cross-section stability
   23.18. System of a being self-leveled back suspension bracket on the Versatile person models
   + 23.19. Elements of a being self-leveled back suspension bracket
   23.20. Steering wheel
   23.21. Steering column
   23.22. Lock steering column / lock of ignition
   23.23. Contact group of the lock of ignition
   23.24. Rubber coupling of a steering shaft
   23.25. Steering transfer
   23.26. Soshka of steering transfer
   23.27. Replacement of the bottom sealing ring of steering transfer
   23.28. Pump of the amplifier of a steering
   23.29. Pumping of system of the amplifier of a steering
   23.30. Steering shock-absorber
   23.31. Central steering draft
   23.32. Intermediate lever of a steering
   23.34. Spherical hinges of cross-section steering draft
   23.35. Cross-section steering draft
   23.36. Corners of installation of wheels
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






23.14.2. Installation

The top lever defining disorder

PERFORMANCE ORDER
1. If necessary press the adjusting plug in a fixing element of a nave.
2. Establish the lever into place, insert sharnirny bolts and screw on them new nuts, without tightening them it is final.
3. Establish a back wheel, then lower the car on the earth and tighten bolts of fastening of a wheel the demanded moment.
4. Shake the car in order that elements of fastening of the lever were established on the places, then screw up both nuts of sharnirny bolts the demanded moment.

Top jet lever

PERFORMANCE ORDER
1. Establish the lever into place, insert sharnirny bolts and screw on them new nuts, without tightening them it is final.
2. Establish a back wheel, then lower the car on the earth and tighten bolts of fastening of a wheel the demanded moment.
3. Shake the car in order that elements of fastening of the lever were established on the places, then screw up both nuts of sharnirny bolts the demanded moment.

Bottom lever of compensation of axial pressure

PERFORMANCE ORDER
1. If necessary press the adjusting plug in a fixing element of a nave.
2. Establish the lever into place, insert sharnirny bolts and screw on them new nuts, without tightening them it is final.
3. Establish a back wheel, then lower the car on the earth and tighten bolts of fastening of a wheel the demanded moment.
4. Shake the car in order that elements of fastening of the lever were established on the places, then screw up both nuts of sharnirny bolts the demanded moment.

The bottom directing lever

PERFORMANCE ORDER
1. Establish the lever into place, then insert an internal sharnirny bolt and an ekstsentrikovy washer and screw on a bolt a new nut, but do not tighten it finally.
2. Establish a pin of the spherical hinge on a fixing element of a nave and fix a new nut, having tightened it the demanded moment.
3. Establish a back wheel, then lower the car on the earth and tighten bolts of fastening the demanded moment.
4. Shake the car for the correct installation of the lever, check that labels on the bottom frame, a sharnirny bolt and an ekstsentrikovy washer are combined, then tighten a nut of a sharnirny bolt the demanded moment.
Prevention

At the first possibility check a convergence of back wheels.