Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
- SUSPENSION BRACKET
   23.2. General information
   23.3. Bearing of a forward nave
   23.4. Nave of a forward wheel
   23.5. Rotary fist
   23.6. Shock-absorber of a forward suspension bracket
   23.7. Spring of a forward suspension bracket
   23.8. Bottom lever of a forward suspension bracket
   23.9. Forward stabilizer of cross-section stability
   23.10. Fixing element of a back nave
   23.11. Replacement of the bearing of a back nave
   + 23.12. Shock-absorber of a back suspension bracket
   23.13. Spring of a back suspension bracket
   + 23.14. Levers of a back suspension bracket
   23.15. Bottom lever of a back suspension bracket
   23.16. Stabilizer of cross-section stability of a back suspension bracket
   23.17. Connecting earring of the stabilizer of cross-section stability
   23.18. System of a being self-leveled back suspension bracket on the Versatile person models
   + 23.19. Elements of a being self-leveled back suspension bracket
   23.20. Steering wheel
   23.21. Steering column
   23.22. Lock steering column / lock of ignition
   23.23. Contact group of the lock of ignition
   23.24. Rubber coupling of a steering shaft
   23.25. Steering transfer
   23.26. Soshka of steering transfer
   23.27. Replacement of the bottom sealing ring of steering transfer
   23.28. Pump of the amplifier of a steering
   23.29. Pumping of system of the amplifier of a steering
   23.30. Steering shock-absorber
   23.31. Central steering draft
   23.32. Intermediate lever of a steering
   23.34. Spherical hinges of cross-section steering draft
   23.35. Cross-section steering draft
   23.36. Corners of installation of wheels
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






23.21. Steering column

GENERAL INFORMATION

Prevention

At installation it is necessary to use a new bolt of fastening of the rubber coupling of a steering column.


Removal

Arrangement of a bolt of fastening of the rubber coupling to a steering column

Arrangement of nuts of the bottom fastening of a steering column

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove a steering wheel.
3. Remove the lock of a steering column.
4. Remove a combination of devices, the multipurpose switch of a steering column and a casing of a steering column.
5. Working in a motor compartment and using paint or a chertilka, note the mutual provision of the bottom end of a steering column and the rubber coupling.
6. Unscrew and take the top bolt of fastening of the coupling to a steering column (see fig. An arrangement of a bolt of fastening of the rubber coupling to a steering column).
7. Unscrew the top bolts of fastening of a steering column access to which is possible through an aperture for a combination of devices. Unscrew nuts of the bottom fastening of a steering column (see fig. Arrangement of nuts of the bottom fastening of a steering column).
8. Remove the plug of a protective cover of a steering column from a partition of a motor compartment and remove a steering column from the car. Check a condition of the rubber coupling and, if necessary, replace it.

Check

PERFORMANCE ORDER
1. The steering column has a telescopic element of safety. At a head-on collision the telescopic element of safety collapses, a significant amount of energy that reduces risk of a travmirovaniye of the driver about a steering wheel is thus absorbed. Check a condition of a steering column, in particular elements of its fastening on existence of damages and deformation and, if necessary, replace.
2. Check люфт a steering shaft in plugs of a steering column. If plugs of a steering column are worn-out or damaged, the steering column is necessary for repairing. Repair of a steering column is necessary for making at service station with use of special tools.

Installation

PERFORMANCE ORDER
1. Before installation grease the bottom plug of a steering column with universal greasing. Combine labels on the rubber coupling and a steering column and establish a steering column in grooves of the rubber coupling.
2. Check correctness of an arrangement of the plug of a protective cover of a steering column on a partition of a motor compartment, then fix a steering column bolts and nuts, having tightened them the demanded moment.
3. Fix the rubber coupling a new bolt and tighten it the demanded moment.
4. Establish the multipurpose switch on a steering column and a combination of devices on the dashboard.
5. Put the lock of a steering column.
6. Establish a steering wheel.