Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
- SUSPENSION BRACKET
   23.2. General information
   23.3. Bearing of a forward nave
   23.4. Nave of a forward wheel
   23.5. Rotary fist
   23.6. Shock-absorber of a forward suspension bracket
   23.7. Spring of a forward suspension bracket
   23.8. Bottom lever of a forward suspension bracket
   23.9. Forward stabilizer of cross-section stability
   23.10. Fixing element of a back nave
   23.11. Replacement of the bearing of a back nave
   + 23.12. Shock-absorber of a back suspension bracket
   23.13. Spring of a back suspension bracket
   + 23.14. Levers of a back suspension bracket
   23.15. Bottom lever of a back suspension bracket
   23.16. Stabilizer of cross-section stability of a back suspension bracket
   23.17. Connecting earring of the stabilizer of cross-section stability
   23.18. System of a being self-leveled back suspension bracket on the Versatile person models
   + 23.19. Elements of a being self-leveled back suspension bracket
   23.20. Steering wheel
   23.21. Steering column
   23.22. Lock steering column / lock of ignition
   23.23. Contact group of the lock of ignition
   23.24. Rubber coupling of a steering shaft
   23.25. Steering transfer
   23.26. Soshka of steering transfer
   23.27. Replacement of the bottom sealing ring of steering transfer
   23.28. Pump of the amplifier of a steering
   23.29. Pumping of system of the amplifier of a steering
   23.30. Steering shock-absorber
   23.31. Central steering draft
   23.32. Intermediate lever of a steering
   23.34. Spherical hinges of cross-section steering draft
   23.35. Cross-section steering draft
   23.36. Corners of installation of wheels
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






23.28. Pump of the amplifier of a steering

Removal

PERFORMANCE ORDER
1. Tighten the parking brake, then lift a forward part of the car and fix on supports.
2. Weaken a tension of an auxiliary driving belt and remove a driving belt from a pulley of the pump of the amplifier of a steering, previously having weakened bolts of fastening of a pulley.
3. For improvement of access to the pump of the amplifier of a steering remove an air inlet hose.
4. Having noted a pulley arrangement, unscrew bolts and remove a pulley from the pump of the amplifier of a steering.
5. Wipe area about connections of the pump of the amplifier of a steering and mark hydraulic tubes and hoses.
6. Unscrew connecting nuts and disconnect hoses from the pump. Jams close the ends of hoses and an opening in the pump.
7. At existence unscrew an arm from a back part of the pump.
8. Unscrew bolts of fastening and take the pump of the amplifier of a steering from a motor compartment.
9. In the presence of malfunction of the pump it is necessary for repairing at service station.

Installation

PERFORMANCE ORDER
1. Establish the pump of the amplifier of a steering on a place and fix it bolts, having tightened them the demanded moment. At existence screw an arm on a back part of the pump.
2. According to marking connect to the pump hoses and fix them connecting nuts.
3. According to earlier made marking establish a pulley on the pump of the amplifier of a steering and fix it bolts, having tightened them the demanded moment.
4. Establish an auxiliary driving belt on a pulley of the pump of the amplifier of a steering and adjust its tension.
5. Fill the pump liquid and remove air from hydraulic system. On the Versatile person models with 6-cylinder petrol engines and diesel engines with a turbo-supercharging it is also necessary to remove air from system of a being self-leveled back suspension bracket.