1. Tighten the parking brake, then lift a forward part of the car and fix on supports. |
2. Unscrew the nuts, fixing spherical hinges of the central and cross-section steering bent for to the intermediate lever. For removal of spherical hinges of steering drafts from the intermediate lever use a stripper (see drawing). |
3. Unscrew a bolt and remove the thermofilter. |
4. Unscrew a nut from a sharnirny bolt of the intermediate lever and remove a washer. Take a sharnirny bolt, then remove the intermediate lever together with laying from the hinge case. |
5. Check a condition of the intermediate lever on existence of damages and, if necessary, replace it. Check a condition of plugs of the hinge of the intermediate lever on existence of wear and damages and, if necessary, replace them. Replacement of plugs can be made in house conditions for what beat out old plugs from the hinge case, and then establish new nuts with application and a bolt with big washers. Before installation of the plug moisten with soap water. |