Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
- SUSPENSION BRACKET
   23.2. General information
   23.3. Bearing of a forward nave
   23.4. Nave of a forward wheel
   23.5. Rotary fist
   23.6. Shock-absorber of a forward suspension bracket
   23.7. Spring of a forward suspension bracket
   23.8. Bottom lever of a forward suspension bracket
   23.9. Forward stabilizer of cross-section stability
   23.10. Fixing element of a back nave
   23.11. Replacement of the bearing of a back nave
   + 23.12. Shock-absorber of a back suspension bracket
   23.13. Spring of a back suspension bracket
   + 23.14. Levers of a back suspension bracket
   23.15. Bottom lever of a back suspension bracket
   23.16. Stabilizer of cross-section stability of a back suspension bracket
   23.17. Connecting earring of the stabilizer of cross-section stability
   23.18. System of a being self-leveled back suspension bracket on the Versatile person models
   + 23.19. Elements of a being self-leveled back suspension bracket
   23.20. Steering wheel
   23.21. Steering column
   23.22. Lock steering column / lock of ignition
   23.23. Contact group of the lock of ignition
   23.24. Rubber coupling of a steering shaft
   23.25. Steering transfer
   23.26. Soshka of steering transfer
   23.27. Replacement of the bottom sealing ring of steering transfer
   23.28. Pump of the amplifier of a steering
   23.29. Pumping of system of the amplifier of a steering
   23.30. Steering shock-absorber
   23.31. Central steering draft
   23.32. Intermediate lever of a steering
   23.34. Spherical hinges of cross-section steering draft
   23.35. Cross-section steering draft
   23.36. Corners of installation of wheels
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






23.9. Forward stabilizer of cross-section stability

GENERAL INFORMATION

Prevention

At installation of the stabilizer of cross-section stability it is necessary to use new nuts of fastening of clips of the stabilizer.


Removal

Unscrewing of the nut, fixing a clip which the stabilizer of cross-section stability to the bottom lever of a forward suspension bracket, in turn, fixes

Unscrewing of the nuts, fixing clips which, in turn, fix the stabilizer of cross-section stability to body arms

PERFORMANCE ORDER
1. Tighten the parking brake, then lift a forward part of the car and fix on supports. Remove forward wheels.
2. Unscrew screws and remove an engine mudguard from the lower part of a motor compartment.
3. Put the labels defining mutual position of plugs of fastening and the stabilizer of cross-section stability.
4. Unscrew nuts and remove the clips, fixing the stabilizer of cross-section stability to the bottom levers of a forward suspension bracket (see fig. Unscrewing of the nut, fixing a clip which the stabilizer of cross-section stability to the bottom lever of a forward suspension bracket, in turn, fixes).
5. Unscrew nuts and take the bolts, fixing clips of the stabilizer of cross-section stability to body arms, and remove clips (see fig. Unscrewing of the nuts, fixing clips which, in turn, fix the stabilizer of cross-section stability to body arms).
6. Take the stabilizer of cross-section stability from under the car.
7. Check the stabilizer of cross-section stability on wear and mechanical damages. Special attention give to a condition of plugs of installation of the stabilizer.

Installation

PERFORMANCE ORDER
1. If acted in film, establish arms of fastening of the stabilizer of cross-section stability on a body and fix bolts, having tightened them the demanded moment.
2. Moisten adjusting plugs of the stabilizer with soap water and establish them into place.
3. Combine rubber pillows according to earlier put labels and establish the stabilizer of cross-section stability on the car.
4. Establish rubber pillows of the stabilizer of cross-section stability on arms and establish on them clips. Insert bolts of fastening of clips and screw on them new nuts, but do not tighten them finally.
5. Establish the rubber pillows located at edges of the stabilizer of cross-section stability on the bottom levers of a forward suspension bracket, establish on them clips and fix new nuts, having tightened them the demanded moment.
6. Check that the labels put before removal of the stabilizer, were combined and tighten the demanded moment of a nut of fastening of clips of the stabilizer to body arms.
7. Establish a body mudguard.
8. Establish wheels, then lower the car on the earth and tighten bolts of fastening of a wheel the demanded moment.