W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
24.2. General information
24.3. Care of a body
24.4. Care of an upholstery and rugs
24.5. Repair of insignificant damages of a body
24.6. Repair of strong damages of a body
24.7. Front bumper
24.8. Rear bumper
24.9. Cowl
24.10. Cable of opening of the lock of a cowl
24.11. Cowl lock
24.12. Doors
24.13. Door upholstery
+ 24.14. Door handles and locks
+ 24.15. Glass of a door and window regulators
24.16. Trunk lid
24.17. Trunk lid lock
24.18. Back door
24.19. Lock of a back door
24.20. Elements of the central lock
24.21. External rear-view mirrors
24.22. Wind and back flew down
24.23. Hatch
24.24. External details of a body
24.25. Sitting
24.25.2. Installation
24.26. Mechanism of a tension of a seat belt of forward sitting
+ 24.27. Seat belt elements
24.28. Interior furnish
24.29. Central console
24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS
|
Removal
Forward door
Arrangement of a rubber protective cover at an end face of a forward door
Extraction of the pin, opening of a door fixing the limiter
Arrangement of bolts of fastening of a forward door
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. If the car has electric window regulators or is equipped with the central lock, remove a door upholstery. |
| 3. From the electric equipment located at doors disconnect electric sockets and a vacuum hose of the central lock. Note an arrangement, then take from fastening brackets electroconducting and a vacuum hose. Remove a rubber sealing ring from a forward end face of a door and take electroconducting and a vacuum hose from a door. |
| 4. Using a pencil or a marker, note an arrangement of hinges on a door rack. |
| 5. Remove a bracket of fastening and a washer and take the sharnirny pin, the fixing limiter of opening of a door to a forward rack. If the sharnirny pin sits very densely, using a drift and a hammer, beat out it. From an end face of a door remove a rubber protective cover (see fig. An arrangement of a rubber protective cover at an end face of a forward door, Extraction of the pin, opening of a door fixing the limiter). |
| 6. While the assistant supports a door, unscrew bolts of fastening of a door and remove it from the car (see fig. Arrangement of bolts of fastening of a forward door). |
| 7. Check a condition of hinges of a door on existence of wear and damages. In need of replacement of hinges of a door note their arrangement on a door, then unscrew bolts and remove hinges from a door. On labels establish the new hinge and fix it bolts, having tightened them the demanded moment. |
|
Back door
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. If the car has electric window regulators or is equipped with the central lock, remove a door upholstery. |
| 3. From the electric equipment located at doors disconnect electric sockets and a vacuum hose of the central lock. Note an arrangement, then take from fastening brackets electroconducting and a vacuum hose. Remove a rubber sealing ring from a forward end face of a door and take electroconducting and a vacuum hose from a door. |
| 4. Using a pencil or a marker, note an arrangement of hinges on a door rack. |
| 5. Remove a bracket of fastening and a washer and take the sharnirny pin, the fixing limiter of opening of a door to a forward rack. If the sharnirny pin sits very densely, using a drift and a hammer, beat out it. From an end face of a door remove a rubber protective cover. |
| 6. While the assistant supports a door, unscrew bolts of fastening of a door and remove it from the car. |
|
Installation
| PERFORMANCE ORDER |
| 1. Establish a door on the car and acquire bolts of fastening of the hinge of a door. Level door hinges according to the labels put before removal, then tighten bolts of fastening of the hinge the demanded moment. |
| 2. Move a rubber protective cover on the limiter, then combine the limiter of opening of a door with an arm and establish a sharnirny pin and a washer and fix it a bracket. Establish a rubber protective cover on a forward end face of a door. |
| 3. At existence stretch at a door a vacuum hose and electroconducting and establish rubber consolidation into place. Check correctness of an arrangement of a hose and electric conducting and fix them brackets. |
| 4. After installation of a door check, that the gap on perimeter of a door was everywhere identical, and also that the external surface of a door was aflush with other elements of a body. For gap adjustment on perimeter of a door weaken bolts of fastening of hinges of a door and, moving a door, adjust its situation then tighten fastening bolts. |
| 5. For door installation aflush with other elements of a body weaken bolts of fastening of the hinge of a door to a door and adjust the provision of a door then tighten fastening bolts. |
| 6. Check that the door lock accurately comes on the shock plate located on a rack. If adjustment is necessary, weaken the screws, fixing a shock plate, move a shock plate and tighten fastening screws. |
| 7. Connect a weight wire to the accumulator. |
|
|
|