Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
   24.2. General information
   24.3. Care of a body
   24.4. Care of an upholstery and rugs
   24.5. Repair of insignificant damages of a body
   24.6. Repair of strong damages of a body
   24.7. Front bumper
   24.8. Rear bumper
   24.9. Cowl
   24.10. Cable of opening of the lock of a cowl
   24.11. Cowl lock
   24.12. Doors
   24.13. Door upholstery
   - 24.14. Door handles and locks
      24.14.2. Installation
   + 24.15. Glass of a door and window regulators
   24.16. Trunk lid
   24.17. Trunk lid lock
   24.18. Back door
   24.19. Lock of a back door
   24.20. Elements of the central lock
   24.21. External rear-view mirrors
   24.22. Wind and back flew down
   24.23. Hatch
   24.24. External details of a body
   24.25. Sitting
   24.25.2. Installation
   24.26. Mechanism of a tension of a seat belt of forward sitting
   + 24.27. Seat belt elements
   24.28. Interior furnish
   24.29. Central console
   24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






24.14. Door handles and locks

24.14.1. Removal

Internal handle of opening of a door

PERFORMANCE ORDER
1. Lift the internal handle of opening of a door and remove decorative furnish of the handle for what pick up it a screw-driver from the bottom party. Unscrew the screw of fastening of the internal handle of opening of a door, then move the handle forward and remove it. Thus unhook from the handle draft.

Cylinder of the lock of a forward door

Removal of a rubber cap from an end face of a forward door

Unscrewing of the screw of fastening of a casing of the cylinder of the lock of a casing of a forward door

Extraction of the cylinder of the lock from a door

Extraction of the cylindrical pin, fixing draft and a spring

Removal of draft and spring from the lock cylinder

Extraction of the cylinder of the lock from a casing

PERFORMANCE ORDER
1. For access to the screw of fastening of a casing of the cylinder of the lock open a door and remove from a door end face a rubber cap. Unscrew the screw of fastening of a casing of the cylinder of the lock on four turns (see fig. Removal of a rubber cap from an end face of a forward door, Unscrewing of the screw of fastening of a casing of the cylinder of the lock of a casing of a forward door).
2. Insert a key into the lock of a door and, pressing the lock cylinder, turn a key on 60 ° clockwise. The casing of the cylinder of the lock is thus released, and he can be taken from a door. For replacement of the cylinder of the lock beat out a cylindrical pin, remove draft and a spring and take the lock cylinder from a casing (see fig. Extraction of the cylinder of the lock from a door, Extraction of the cylindrical pin, fixing draft and a spring, Removal of draft and a spring from the lock cylinder, Extraction of the cylinder of the lock from a casing).

External handle of opening of a forward door

Removal of the external handle of a forward door

Removal of sealing laying of the handle of a door

Arrangement of screws of fastening of an arm of the external handle of a forward door

PERFORMANCE ORDER
1. Remove the lock cylinder.
2. Move the external handle of a forward door back, then take its forward end from a fixing arm and remove the handle from a door. Remove sealing laying of the handle of a door (see fig. Removal of the external handle of a forward door, Removal of sealing laying of the handle of a door).
3. In need of removal of a fixing arm of the external handle of a forward door remove a door upholstery. Being careful, remove a protective film from the interior of a door. Unscrew screws of fastening of an arm and take it from door inside (see fig. Arrangement of screws of fastening of an arm of the external handle of a forward door).

Lock of a forward door

Arrangement of the internal handle of opening of a door directing for draft

Arrangement of screws of fastening of the lock of a door

Removal of the lock from a forward door

PERFORMANCE ORDER
1. Remove an upholstery from a forward door. Being careful, remove a protective film from the interior of a door. If the protective film is damaged at removal, it is necessary to replace it.
2. Remove the lock cylinder. At existence, remove a protective casing of the lock through apertures from the interior of a door.
3. On models with the central lock remove the executive mechanism.
4. Take draft of the internal handle of opening of a door from directing, then disconnect draft from the lock of opening of a door (see fig. An arrangement of the internal handle of opening of a door directing for draft).
5. Unscrew screws of fastening of the lock, then disconnect the lock from draft of the external handle of opening of a door and take it from a door. At existence, disconnect from the lock the electric socket (see fig. Arrangement of screws of fastening of the lock of a door, Removal of the lock from a forward door).

External handle of opening of a back door

Removal of consolidation from an end face of a back door for access to the screw of fastening of an emphasis of the handle

Removal of an emphasis of the handle of opening of a back door

PERFORMANCE ORDER
1. For access to the screw of fastening of an emphasis of the handle open a door and remove consolidation from a back end face of a door. Unscrew the screw of fastening of an emphasis of the handle of a door on four turns and remove a handle emphasis from a door (see fig. Removal of consolidation from an end face of a back door for access to the screw of fastening of an emphasis of the handle, Removal of an emphasis of the handle of opening of a back door).
2. Move the external handle of a forward door back, then take its forward end from a fixing arm and remove the handle from a door. Remove sealing laying of the handle of a door.
3. In need of removal of a fixing arm of the external handle of a forward door remove a door upholstery. Being careful, remove a protective film from the interior of a door. Unscrew screws of fastening of an arm and take it from door inside.

Lock of a back door

Arrangement directing for drafts of a back door

Arrangement of screws of fastening of the lock of a back door

PERFORMANCE ORDER
1. Remove the external handle of opening of a back door and a fixing arm of the handle. At existence, remove a protective casing of the lock of a back door.
2. Take drafts of the internal handle of opening of a door and the button of blocking of the lock from the directing. Note an arrangement of drafts and disconnect them from the lock. Unscrew screws of fastening of the lock and remove it from a door (see fig. An arrangement directing for drafts of a back door, the Arrangement of screws of fastening of the lock of a back door).