Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
   24.2. General information
   24.3. Care of a body
   24.4. Care of an upholstery and rugs
   24.5. Repair of insignificant damages of a body
   24.6. Repair of strong damages of a body
   24.7. Front bumper
   24.8. Rear bumper
   24.9. Cowl
   24.10. Cable of opening of the lock of a cowl
   24.11. Cowl lock
   24.12. Doors
   24.13. Door upholstery
   + 24.14. Door handles and locks
   + 24.15. Glass of a door and window regulators
   24.16. Trunk lid
   24.17. Trunk lid lock
   24.18. Back door
   24.19. Lock of a back door
   24.20. Elements of the central lock
   24.21. External rear-view mirrors
   24.22. Wind and back flew down
   24.23. Hatch
   24.24. External details of a body
   24.25. Sitting
   24.25.2. Installation
   24.26. Mechanism of a tension of a seat belt of forward sitting
   + 24.27. Seat belt elements
   24.28. Interior furnish
   24.29. Central console
   24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






24.18. Back door

Removal

Removal of the panel of furnish from the left rack of a back door

Removal of the top panels of furnish of racks of a back door

Unscrewing of the forward screw of fastening of the panel of furnish of a ceiling

Arrangement of back screws of fastening of the panel of furnish of a ceiling

Removal of the panel of furnish of a ceiling

Ceiling removal for access to connecting plugs

Arrangement of connecting plugs of electroconducting of a back door

Arrangement of a junction of a hose of a washer of back glass and vacuum hose of the central lock

Arrangement of bolts of fastening of the hinge to a back door

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove lateral panels of furnish of a luggage compartment for access to the panel of furnish of a rack of a back door. For access improvement on the left side take a spare wheel.
3. Release brackets of fastening and from the left and right side remove the bottom panels of furnish from racks of a back door (see fig. Removal of the panel of furnish from the left rack of a back door).
4. Take from the top panels of furnish of racks of a back door of a lamp of illumination of a luggage compartment, then disconnect from them electric sockets and take lamps from the car.
5. Unscrew the screws, fixing top panels of furnish of racks of a back door. For extraction of panels from brackets of fastening move them down and remove from the car (see fig. Removal of the top panels of furnish of racks of a back door).
6. Unscrew the screws, furnish of a ceiling fixing the back panel, then move the panel back and remove it from the car (see fig. Unscrewing of the forward screw of fastening of the panel of furnish of a ceiling, Arrangement of back screws of fastening of the panel of furnish of a ceiling, Removal of the panel of furnish of a ceiling).
7. Remove a ceiling and move the block of connecting plugs of electroconducting of a back door on the left side of the car (see fig. Ceiling removal for access to connecting plugs, the Arrangement of connecting plugs of electroconducting of a back door). Mark each wire, then unscrew screws and remove wires from the block of plugs. Remove from a body a sealing ring and take electroconducting of a back door from a body in order that it could be removed together with a back door.
8. Disconnect a hose of a washer of back glass and a vacuum hose of the central lock and take them from a body so that they could be removed together with a back door (see fig. Arrangement of a junction of a hose of a washer of back glass and vacuum hose of the central lock).
9. Using a marker or a pencil, note position of each hinge on a back door.
10. Using two assistants, unscrew the bolts, fixing hinges to a back door and remove a back door from the car (see fig. An arrangement of bolts of fastening of the hinge to a back door).
11. Check a condition of hinges of a back door and, if necessary, replace them.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Combine hinges of a back door according to the labels put before removal. Without establishing the furnish panel, connect the accumulator and check operation of all electric units of a back door. After installation of a door check, that the gap on perimeter of a door was everywhere identical, and also that the external surface of a door was aflush with other elements of a body. For gap adjustment on perimeter of a door weaken bolts of fastening of hinges of a door and, moving a door, adjust its situation then tighten fastening bolts.