Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
   24.2. General information
   24.3. Care of a body
   24.4. Care of an upholstery and rugs
   24.5. Repair of insignificant damages of a body
   24.6. Repair of strong damages of a body
   24.7. Front bumper
   24.8. Rear bumper
   24.9. Cowl
   24.10. Cable of opening of the lock of a cowl
   24.11. Cowl lock
   24.12. Doors
   24.13. Door upholstery
   + 24.14. Door handles and locks
   + 24.15. Glass of a door and window regulators
   24.16. Trunk lid
   24.17. Trunk lid lock
   24.18. Back door
   24.19. Lock of a back door
   24.20. Elements of the central lock
   24.21. External rear-view mirrors
   24.22. Wind and back flew down
   24.23. Hatch
   24.24. External details of a body
   24.25. Sitting
   24.25.2. Installation
   24.26. Mechanism of a tension of a seat belt of forward sitting
   + 24.27. Seat belt elements
   24.28. Interior furnish
   24.29. Central console
   24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS



TopPartner: www.BakersfieldCaInstallmentPayday.Loan



24.19. Lock of a back door

Removal

Extraction of a percussion cap of fastening of an upholstery of a back door

Removal of the bottom upholstery of a back door

Removal of a decorative overlay of the button of the lock of a door

Detachment of drafts from the door lock

Detachment of the electric socket of the lock of a back door

Arrangement of bolts of fastening of the lock of a back door

Removal of the lock of a back door

Unscrewing of the screw, the lock of a back door fixing the internal handle

Arrangement of bolts of fastening of the cylinder of the lock to the lock of a back door

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator. Open a back door, then take percussion caps and remove the bottom upholstery of a back door. For extraction of a percussion cap unscrew the central screw and take a percussion cap from an upholstery (see fig. Extraction of a percussion cap of fastening of an upholstery of a back door, Removal of the bottom upholstery of a back door).
2. Disconnect a decorative cover of the button of the lock of a back door, then release the internal panel and remove it from a back door (see fig. Removal of a decorative overlay of the button of the lock of a door).
3. Note an arrangement of drafts and disconnect them from the door lock (see fig. A detachment of drafts from the door lock).
4. Disconnect the electric socket located on wires of the lock, then unscrew bolts of fastening and remove the lock from a back door together with a rubber sealing ring of the cylinder of the lock. Probably, for space release for removal of the lock it is necessary to unscrew the screw and to remove the internal handle of the lock from a back door (see fig. A detachment of the electric socket of the lock of a back door, the Arrangement of bolts of fastening of the lock of a back door, Removal of the lock of a back door, Unscrewing of the screw, the lock of a back door fixing the internal handle).
5. Repair of the lock of a back door is necessary for making at service station. The only thing that it is possible to replace independently, is the microswitch and the engine of closing of the lock. If necessary, unscrew bolts and remove the lock cylinder from the lock of a back door (see fig. An arrangement of bolts of fastening of the cylinder of the lock to the lock of a back door).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Before installation of the panel of furnish check operation of the lock of a back door.