Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
   24.2. General information
   24.3. Care of a body
   24.4. Care of an upholstery and rugs
   24.5. Repair of insignificant damages of a body
   24.6. Repair of strong damages of a body
   24.7. Front bumper
   24.8. Rear bumper
   24.9. Cowl
   24.10. Cable of opening of the lock of a cowl
   24.11. Cowl lock
   24.12. Doors
   24.13. Door upholstery
   + 24.14. Door handles and locks
   + 24.15. Glass of a door and window regulators
   24.16. Trunk lid
   24.17. Trunk lid lock
   24.18. Back door
   24.19. Lock of a back door
   24.20. Elements of the central lock
   24.21. External rear-view mirrors
   24.22. Wind and back flew down
   24.23. Hatch
   24.24. External details of a body
   24.25. Sitting
   24.25.2. Installation
   24.26. Mechanism of a tension of a seat belt of forward sitting
   + 24.27. Seat belt elements
   24.28. Interior furnish
   24.29. Central console
   24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






24.21. External rear-view mirrors

Mirror with manual adjustment

PERFORMANCE ORDER
1. Release a bracket of fastening of the handle of adjustment of a mirror and remove the handle.
2. From the interior of a door remove a decorative overlay of a mirror for what disconnect its top part, then move a slip up and remove it from a door.
3. Unscrew screws and remove a rear-view mirror from a door. Remove the rubber consolidation established between a door and a mirror, check its condition and, if necessary, replace.
4. Installation is made in sequence, return to removal. If the mechanism of adjustment of provision of a mirror has люфт, eliminate it, having tightened the screw close to the handle of adjustment.

Mirror with an electric drive

Unscrewing of the screw of fastening of the electric socket of a mirror

Arrangement of screws of fastening of an external rear-view mirror

PERFORMANCE ORDER
1. From the interior of a door remove a decorative overlay of a mirror for what disconnect its top part, then move a slip up and remove it from a door.
2. Unscrew the screw of fastening and disconnect the electric socket from a mirror (see fig. Unscrewing of the screw of fastening of the electric socket of a mirror).
3. Unscrew screws of fastening and remove a mirror from a door (see fig. Arrangement of screws of fastening of an external rear-view mirror). Remove the rubber consolidation located between a door and a mirror. Check its condition and, if necessary, replace.
4. Installation is made in sequence, return to removal.

Mirror glass


Prevention

Glass of a mirror is pasted to the electric motor, therefore at its removal be careful not to break glass.


PERFORMANCE ORDER
1. Turn glass so that the inside of glass was included on the maximum size into the mirror case. Then insert a wide plastic or wooden wedge between glass of a mirror and the plastic case of a mirror. Being careful, remove mirror glass.
2. At existence disconnect electric sockets from an element of heating of a mirror.
3. Connect electric sockets to an element of heating of a mirror, then being careful, establish mirror glass before its accurate fixing.

Engine of adjustment of provision of a mirror

PERFORMANCE ORDER
1. Remove mirror glass.
2. Unscrew screws and remove the engine of provision of adjustment of a mirror and disconnect from it the electric socket.
3. Connect to the engine the electric socket and fix the engine screws. Check operation of the engine of adjustment of provision of a mirror, then establish mirror glass.