Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
   24.2. General information
   24.3. Care of a body
   24.4. Care of an upholstery and rugs
   24.5. Repair of insignificant damages of a body
   24.6. Repair of strong damages of a body
   24.7. Front bumper
   24.8. Rear bumper
   24.9. Cowl
   24.10. Cable of opening of the lock of a cowl
   24.11. Cowl lock
   24.12. Doors
   24.13. Door upholstery
   + 24.14. Door handles and locks
   + 24.15. Glass of a door and window regulators
   24.16. Trunk lid
   24.17. Trunk lid lock
   24.18. Back door
   24.19. Lock of a back door
   24.20. Elements of the central lock
   24.21. External rear-view mirrors
   24.22. Wind and back flew down
   24.23. Hatch
   24.24. External details of a body
   24.25. Sitting
   24.25.2. Installation
   24.26. Mechanism of a tension of a seat belt of forward sitting
   + 24.27. Seat belt elements
   24.28. Interior furnish
   24.29. Central console
   24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






24.25. Sitting

24.25.1. Removal

Forward sitting on the Sedan models and the Versatile person

PERFORMANCE ORDER
1. Move against the stop back and lower a sitting pillow. Remove decorative covers and unscrew forward bolts of fastening from directing sitting.
2. Move sitting against the stop forward and lift a sitting pillow, then unscrew the bolts, fixing a back part directing sitting.
3. Move sitting forward, remove it with internal directing and take from the car.

Forward sitting on Compartment model

PERFORMANCE ORDER
1. Move against the stop back and lower a sitting pillow. Remove decorative covers and unscrew forward bolts of fastening from directing sitting.
2. Move sitting against the stop forward and lift a sitting pillow, then unscrew the bolts, fixing a back part directing sitting.
3. Uncover a back part internal directing sitting and unscrew the screw of fastening of the directing.
4. Reject sitting back, then, at existence, disconnect from sitting a vacuum tube and the electric socket and take sitting from the car.

Back sitting on the Sedan model

PERFORMANCE ORDER
1. Release the clamps located in the basis of a pillow of back sitting, then lift a pillow and take it from the car.
2. Unscrew the bolts, backs of back sitting fixing the lower part.
3. Move a back of back sitting up, thus it leaves the top clamps, and take it from the car.

Back sitting on the Versatile person model

Handle pressing before removal of a pillow of back sitting from sharnirny pins

Removal of a decorative slip from lateral face of a back of a back seat

Arrangement of screws of fastening of the hinge to a back of a back seat

Removal of a fixing bracket from an external sharnirny pin before removal of a back of a back seat

PERFORMANCE ORDER
1. The left and right sitting on the Versatile person model act in film equally.
2. Wring out a pillow of back sitting, then press the handle on the lower part of sitting and remove a pillow of back sitting from sharnirny pins (see fig. Handle pressing before removal of a pillow of back sitting from sharnirny pins).
3. Disconnect fastening of a seat belt of back sitting and remove it from a seat back.
4. Incline a back of back sitting forward and remove from lateral face of a back a decorative slip. Unscrew the screws, fixing a back of back sitting to the hinge, then remove a bracket of fastening of an external pin of the hinge and take a sitting back from the car (see fig. Removal of a decorative slip from lateral face of a back of a back seat, the Arrangement of screws of fastening of the hinge to a back of a back seat, Removal of a fixing bracket from an external sharnirny pin before removal of a back of a back seat).

Back sitting on Compartment model

PERFORMANCE ORDER
1. The left and right sitting act in film equally.
2. Release a clamp in the lower part of a pillow of sitting, then lift a pillow and take it from the car.
3. Unscrew a fastening bolt in the lower part of a back of back sitting, then move a back up, thus it leaves the top clamps, and take it from the car.
4. If necessary, after removal of backs of back seats unscrew, and remove an armrest.