Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
   24.2. General information
   24.3. Care of a body
   24.4. Care of an upholstery and rugs
   24.5. Repair of insignificant damages of a body
   24.6. Repair of strong damages of a body
   24.7. Front bumper
   24.8. Rear bumper
   24.9. Cowl
   24.10. Cable of opening of the lock of a cowl
   24.11. Cowl lock
   24.12. Doors
   24.13. Door upholstery
   + 24.14. Door handles and locks
   + 24.15. Glass of a door and window regulators
   24.16. Trunk lid
   24.17. Trunk lid lock
   24.18. Back door
   24.19. Lock of a back door
   24.20. Elements of the central lock
   24.21. External rear-view mirrors
   24.22. Wind and back flew down
   24.23. Hatch
   24.24. External details of a body
   24.25. Sitting
   24.25.2. Installation
   24.26. Mechanism of a tension of a seat belt of forward sitting
   + 24.27. Seat belt elements
   24.28. Interior furnish
   24.29. Central console
   24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






24.28. Interior furnish

Elements of furnish of an interior

PERFORMANCE ORDER
1. Elements of furnish of an interior fasten screws or various type brackets.
2. Before removal of an element of furnish of an interior check that it is not held by other element of furnish imposed on it.
3. First of all unscrew visible screws of fastening of an element of furnish of an interior. If after that the element of furnish of salon does not act in film, means, it is held by the hidden brackets or clamps. Brackets or clamps usually settle down on perimeter of an element of furnish and their detachment is necessary for making by means of a wide flat edge of a screw-driver.
4. For installation it is necessary to combine a clamp with an opening and, having pressed the panel of furnish of an interior, accurately to fix it in an opening.

Ware box

Removal of a latch of the lock of a ware box

Removal of a lamp of illumination of a ware box

Arrangement of screws of fastening of a ware box to the dashboard

Arrangement of screws of fastening of hinges of a cover of a ware box

PERFORMANCE ORDER
1. Open a ware box, unscrew screws and remove a latch of the lock of a ware box (see fig. Removal of a latch of the lock of a ware box).
2. Using a screw-driver as the lever, remove a lamp of illumination of a ware box and disconnect from it the electric socket (see fig. Removal of a lamp of illumination of a ware box).
3. Unscrew screws of fastening of a ware box and take it from the dashboard (see fig. An arrangement of screws of fastening of a ware box to the dashboard).
4. If necessary, unscrew screws of fastening of hinges of a cover of a ware box and uncover. Thus disconnect from a cover draft of the shock-absorber (see fig. Arrangement of screws of fastening of hinges of a cover of a ware box).
5. Installation is made in sequence, return to removal.

Carpet

PERFORMANCE ORDER
1. The carpet of a floor of the car fastens screws on perimeter and in several places in the center.
2. Removal of a carpet of a floor does not represent complexity, however thus it is necessary to remove many elements from car salon, such as sitting, seat belts, the central console etc.