Mercedes W124

since 1985-1995 of release

Repair and car operation


W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
   24.2. General information
   24.3. Care of a body
   24.4. Care of an upholstery and rugs
   24.5. Repair of insignificant damages of a body
   24.6. Repair of strong damages of a body
   24.7. Front bumper
   24.8. Rear bumper
   24.9. Cowl
   24.10. Cable of opening of the lock of a cowl
   24.11. Cowl lock
   24.12. Doors
   24.13. Door upholstery
   + 24.14. Door handles and locks
   + 24.15. Glass of a door and window regulators
   24.16. Trunk lid
   24.17. Trunk lid lock
   24.18. Back door
   24.19. Lock of a back door
   24.20. Elements of the central lock
   24.21. External rear-view mirrors
   24.22. Wind and back flew down
   24.23. Hatch
   24.24. External details of a body
   24.25. Sitting
   24.25.2. Installation
   24.26. Mechanism of a tension of a seat belt of forward sitting
   + 24.27. Seat belt elements
   24.28. Interior furnish
   24.29. Central console
   24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS




24.29. Central console

Removal

Removal of a decorative frame of the lever of a choice of transfers on models with an automatic transmission

Unscrewing of the screw of fastening of a back part of a decorative cover to the central console

Removal of a decorative cover from the central console

Removal of handles of management by a heater

Arrangement of nuts (1) and screws (2) fastenings of the panel of a heater

Removal of the panel of a heater

Arrangement of screws of fastening of a regulator of temperature

Removal of the panel of adjustment of temperature from the central console

Removal of the block of switches from the central console

Arrangement of nuts of fastening of the central console to the dashboard

Arrangement of screws of fastening of a forward part of the central console

Unscrewing of the screw of fastening of a back part of the central console

Removal of the central console

Arrangement of the screw of fastening of a lateral part of a rug

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove decorative furnish and porolonovy inserts from a back part of the central console.
3. Being careful, take from the central console a decorative frame of the lever of gear shifting (see fig. Removal of a decorative frame of the lever of a choice of transfers on models with an automatic transmission).
4. Unscrew the screw, fixing a back part of a decorative cover to the central console and uncover the car (see fig. Unscrewing of the screw of fastening of a back part of a decorative cover to the central console, Removal of a decorative cover from the central console).
5. Having pulled on itself, remove handles of a regulator of a heater and the heater fan. Unscrew two big nuts, fixing regulators, then unscrew two screws located in the lower part and remove the heater panel (see fig. Removal of handles of management by a heater, Arrangement of nuts and screws of fastening of the panel of a heater, Removal of the panel of a heater).
6. Unscrew four screws and remove the panel of adjustment of temperature from a forward part of the central console and disconnect from the panel the electric socket (see fig. Arrangement of screws of fastening of a regulator of temperature, Removal of the panel of adjustment of temperature from the central console).
7. Disconnect the ring switches located in the top part of the panel of switches. Being careful, release the brackets of fastening located from two parties of the panel of switches and, having pulled on itself, remove switches from the central console for access to nuts of fastening of the central console. Unscrew two nuts fixing the central console to the dashboard (see fig. Removal of the block of switches from the central console, the Arrangement of nuts of fastening of the central console to the dashboard).
8. Remove a radio receiver.
9. Release brackets of fastening and remove the panel of switches from a back part of the central console.
10. Unscrew screws of fastening of the central console to a car floor (see fig. Arrangement of screws of fastening of a forward part of the central console, Unscrewing of the screw of fastening of a back part of the central console).
11. Raise the central console, remove it from the lever of gear shifting and take from the car (see fig. Removal of the central console).
12. If necessary, after removal of the central console unscrew screws and release clamps, and then remove lateral parts of a rug (see fig. Arrangement of the screw of fastening of a lateral part of a rug).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. In summary check operation of all switches.