Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
   24.2. General information
   24.3. Care of a body
   24.4. Care of an upholstery and rugs
   24.5. Repair of insignificant damages of a body
   24.6. Repair of strong damages of a body
   24.7. Front bumper
   24.8. Rear bumper
   24.9. Cowl
   24.10. Cable of opening of the lock of a cowl
   24.11. Cowl lock
   24.12. Doors
   24.13. Door upholstery
   + 24.14. Door handles and locks
   + 24.15. Glass of a door and window regulators
   24.16. Trunk lid
   24.17. Trunk lid lock
   24.18. Back door
   24.19. Lock of a back door
   24.20. Elements of the central lock
   24.21. External rear-view mirrors
   24.22. Wind and back flew down
   24.23. Hatch
   24.24. External details of a body
   24.25. Sitting
   24.25.2. Installation
   24.26. Mechanism of a tension of a seat belt of forward sitting
   + 24.27. Seat belt elements
   24.28. Interior furnish
   24.29. Central console
   24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






24.30. Dashboard

Removal

Arrangement of screws of fastening of the handle of release of the parking brake

Cable detachment from the lever of release of the parking brake
After removal of the lower part of the dashboard disconnect a cable from the lever of release of the parking brake

Screw-driver use for release of the clamp, a fixing nozzle of system of ventilation

Extraction of a nozzle of ventilation from the dashboard

Unscrewing of the lever of the parking brake from the bottom furnish of the dashboard on cars with a steering on the right side

Removal of the bottom furnish of the dashboard on cars with a steering on the right side

Removal of consolidation of a door from a forward rack

Unscrewing of the screw of fastening of draft of a folding shutter

Arrangement of the screw of fastening of the block of the central snuffled

Detachment of the handle of management from a back part of the block of the central snuffled

Unscrewing of a nut of fastening of the dashboard from the driver

Unscrewing of a bolt of fastening of the dashboard located in an opening for a loudspeaker

Removal of the dashboard from the car

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove a steering wheel.
3. Remove from the dashboard the left and right loudspeakers.
4. Remove the proof-reader of light of headlights.
5. Remove clamps and remove a covering located round pedals.
6. Unscrew the screw, remove the lever of opening of a cowl and disconnect from it a cable. Unscrew the screws, releases of the parking brake fixing the handle to the dashboard (see fig. Arrangement of screws of fastening of the handle of release of the parking brake).
7. Using an edge of a screw-driver and being careful, remove a decorative overlay of the lock of ignition.
8. Unscrew the top screws of fastening and remove the bottom furnish of the dashboard from the driver. Separate a cable from a back part of the lever of the parking brake and remove the furnish panel with the lever (see fig. A cable detachment from the lever of release of the parking brake). Turn the switch of lighting and take it from the dashboard.
9. Remove a ware box and a cover of a ware box or a safety cushion of the passenger.
10. Using an edge of a thin screw-driver, release clamps and take the left and right nozzles of ventilation from the dashboard (see fig. Screw-driver use for release of the clamp, a fixing nozzle of system of ventilation, Extraction of a nozzle of ventilation from the dashboard).
11. Unscrew the top and bottom screws, dashboards fixing the bottom furnish from the driver and remove it (see fig. Unscrewing of the lever of the parking brake from the bottom furnish of the dashboard on cars with a steering on the right side, Removal of the bottom furnish of the dashboard on cars with a steering on the right side).
12. Remove door consolidation from two forward racks (see fig. Removal of consolidation of a door from a forward rack).
13. Through openings in the central nozzles unscrew the screw, fixing draft of the air zaslonka operating supply of fresh air. Unscrew the screw, then release brackets of fastening and remove the block of the central snuffled, thus disconnect the management handle from a back part of the block (see fig. Unscrewing of the screw of fastening of draft of a folding shutter, the Arrangement of the screw of fastening of the block of the central snuffled, the Detachment of the handle of management from a back part of the block of the central snuffled).
14. Having pulled on itself, remove handles of a regulator of a heater and the heater fan. Unscrew two big nuts, fixing regulators, then unscrew two screws located in the lower part and remove the heater panel (see fig. Arrangement of nuts and screws of fastening of the panel of a heater).
15. Unscrew four screws and remove the panel of adjustment of temperature from a forward part of the central console and disconnect from the panel the electric socket (see fig. Removal of the panel of adjustment of temperature from the central console).
16. Disconnect the ring switches located in the top part of the panel of switches. Being careful, release the brackets of fastening located from two parties of the panel of switches and, having pulled on itself, remove switches from the central console for access to nuts of fastening of the central console. Unscrew two nuts fixing the central console to the dashboard (see fig. An arrangement of nuts of fastening of the central console to the dashboard).
17. Unscrew a nut of fastening of the dashboard from the driver and unscrew two bolts located in openings for loudspeakers. Being careful, move the dashboard from a partition of a motor compartment, thus release windscreen nozzles from the top part of a heater and remove the dashboard from the car (see fig. Unscrewing of a nut of fastening of the dashboard from the driver, Unscrewing of a bolt of fastening of the dashboard located in an opening for a loudspeaker, Removal of the dashboard from the car).

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. Check that nozzles of a windscreen were correctly combined with a heater casing. In end connect the accumulator and check that all electric units and switches correctly work.