Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
- BODY
   24.2. General information
   24.3. Care of a body
   24.4. Care of an upholstery and rugs
   24.5. Repair of insignificant damages of a body
   24.6. Repair of strong damages of a body
   24.7. Front bumper
   24.8. Rear bumper
   24.9. Cowl
   24.10. Cable of opening of the lock of a cowl
   24.11. Cowl lock
   24.12. Doors
   24.13. Door upholstery
   + 24.14. Door handles and locks
   + 24.15. Glass of a door and window regulators
   24.16. Trunk lid
   24.17. Trunk lid lock
   24.18. Back door
   24.19. Lock of a back door
   24.20. Elements of the central lock
   24.21. External rear-view mirrors
   24.22. Wind and back flew down
   24.23. Hatch
   24.24. External details of a body
   24.25. Sitting
   24.25.2. Installation
   24.26. Mechanism of a tension of a seat belt of forward sitting
   + 24.27. Seat belt elements
   24.28. Interior furnish
   24.29. Central console
   24.30. Dashboard
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






24.7. Front bumper

Removal

Unscrewing of the nut located on the center of a bumper in its top part

Arrangement of caps on a support of forward registration plate

Removal of a support of forward registration plate

PERFORMANCE ORDER
1. Tighten the parking brake, then lift a forward part of the car and fix on supports.
2. Open a cowl, unscrew a nut and take a bolt located in the top part on the center of a bumper (see fig. Unscrewing of the nut located on the center of a bumper in its top part).
3. On models with the index of temperature of external air on a combination of devices unscrew screws and remove registration plate from a front bumper. Remove two rubber caps, then unscrew the screw of fastening and remove from a bumper the sensor of temperature of external air and a support of registration plate (see fig. An arrangement of caps on a support of forward registration plate, Removal of a support of forward registration plate).
4. From under the car unscrew the bolts, the fixing ends of a bumper to an arm. On models with an oil radiator unscrew an arm of the heat exchanger and remove the heat exchanger for access to the left bolts of fastening of a bumper.
5. Unscrew nuts of fastening of a bumper and remove a bumper.
6. Check a condition of arms of a bumper and, in the presence of damages, replace them.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.