Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
- ELECTRIC EQUIPMENT
   25.2. General information
   25.3. Electric chains
   25.4. Detection of a faulty electric chain
   25.5. Safety locks and relay
   + 25.6. Switches
   + 25.7. Bulbs of external lighting
   + 25.8. Bulbs of internal lighting
   25.9. Devices of external lighting
   25.10. Adjustment of light of headlights
   25.11. Combination of devices
   25.12. Elements of a combination of devices
   25.13. Cable of a drive of a speedometer
   25.14. Lighter illumination
   25.15. Sound signal
   25.16. Screen wiper lever
   25.17. Screen wiper drive
   25.18. Screen wiper of a back door
   25.19. Elements of system of a washer of a windscreen and headlights
   + 25.20. Sound-reproducing equipment
   25.21. Loudspeakers
   25.22. System elements cruise control
   25.23. Safety cushion
   25.24. Safety cushion elements
   + 25.25. Electric circuits
+ CHECK OF MALFUNCTIONS






25.11. Combination of devices

Removal

Removal of a combination of devices from the dashboard

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Tighten the parking brake, then lift a forward part of the car and fix on supports.
3. Working under the car, move a cable of a drive of a speedometer to the left from a transmission. Unscrew a bolt of fastening of a lock ring and take a cable of a drive of a speedometer from a transmission. In this case the cable of a speedometer can be taken in car salon at removal of a combination of devices.
4. Using a piece of a steel strong wire with a hook on the end, insert a wire into a crack between a combination of devices and the dashboard and, having hooked on a hook, take a combination of devices from the dashboard so that access to a cable of a drive of a speedometer (see fig. opened. Removal of a combination of devices from the dashboard).
5. Unscrew a ring with a nakatka and remove from a combination of devices a cable of a drive of a speedometer, then disconnect electric sockets and remove a combination of devices.

Installation

PERFORMANCE ORDER
1. Connect electric sockets of a combination of devices, then connect a cable of a drive of a speedometer and reliably fix it a lock ring.
2. Being careful, establish a combination of devices into place, thus the cable of a drive of a speedometer should pass through a partition in a motor compartment, without being overwound and without forming loops.
3. Fix a cable of a drive of a speedometer on a box before and lower the car.
4. Connect the accumulator and check work of control lamps on a combination of devices.