1. Remove a steering wheel. |
2. Remove the proof-reader of light of headlights. |
3. Lift a floor mat, then unscrew screws of fastening and remove a covering located round pedals. |
4. Unscrew the screw of fastening of the lever of opening of a cowl and remove the lever from the bottom furnish of the dashboard from the driver and disconnect a cable of opening of a cowl from the lever. Unscrew and take the screws, fixing the lever of the parking brake to the dashboard. |
5. Being careful, remove the decorative panel of the lock of ignition. |
6. Unscrew screws and remove the bottom furnish of the dashboard from the driver. Disconnect a cable from a back part of the lever of release of the parking brake and remove the panel of furnish and the lever. |
7. Release electroconducting from brackets of fastening and disconnect the electric socket from the multipurpose switch. |
8. Unscrew screws and remove a casing of a steering column, and then remove the multipurpose switch (see fig. Arrangement of screws of fastening of the multipurpose switch, Removal of the multipurpose switch from a steering column). If necessary, remove the switch of a speed control of movement from the main multipurpose switch. |
9. Installation of the switch is made in sequence, return to removal. |