| 1. Remove the handle from the switch of lighting and unscrew the big nut located under the handle (see fig. Unscrewing of the nut located under the handle of the switch of lighting). |
| 2. Being careful, remove the decorative panel of the switch of lighting and disconnect vacuum hoses and electric sockets. For identification vacuum hoses should be painted in different colors. Otherwise mark vacuum hoses. Remove the proof-reader of light of headlights from the decorative panel of the switch of lighting (see fig. Removal of the proof-reader of light of headlights from the decorative panel of the switch of lighting). |
| 3. Lift a floor mat, then unscrew screws of fastening and remove a covering located round pedals. |
| 4. Unscrew the screw of fastening of the lever of opening of a cowl and remove the lever from the bottom furnish of the dashboard from the driver and disconnect a cable of opening of a cowl from the lever. Unscrew and take the screws, fixing the lever of the parking brake to the dashboard. |
| 5. Being careful, remove the decorative panel of the lock of ignition. |
| 6. Unscrew screws and remove the bottom furnish of the dashboard from the driver. Disconnect a cable from a back part of the lever of release of the parking brake and remove the panel of furnish and the lever. |
| 7. Turn the lighting switch counter-clockwise, remove it from an arm and disconnect from it the electric socket (see fig. Removal of the switch of lighting by its turn counter-clockwise, Extraction of the switch of lighting from the electric socket). |
| 8. Installation is made in sequence, return to removal. |