Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
- ELECTRIC EQUIPMENT
   25.2. General information
   25.3. Electric chains
   25.4. Detection of a faulty electric chain
   25.5. Safety locks and relay
   + 25.6. Switches
   + 25.7. Bulbs of external lighting
   - 25.8. Bulbs of internal lighting
      25.8.1. Forward illumination of salon
      25.8.2. Back illumination of salon
      25.8.3. Lamp of illumination of a luggage carrier
      25.8.4. Bulbs of a combination of devices
      25.8.5. Lamp of illumination of a ware box
      25.8.6. Lamp of illumination of the control panel heater
      25.8.7. Lamps of illumination of switches
   25.9. Devices of external lighting
   25.10. Adjustment of light of headlights
   25.11. Combination of devices
   25.12. Elements of a combination of devices
   25.13. Cable of a drive of a speedometer
   25.14. Lighter illumination
   25.15. Sound signal
   25.16. Screen wiper lever
   25.17. Screen wiper drive
   25.18. Screen wiper of a back door
   25.19. Elements of system of a washer of a windscreen and headlights
   + 25.20. Sound-reproducing equipment
   25.21. Loudspeakers
   25.22. System elements cruise control
   25.23. Safety cushion
   25.24. Safety cushion elements
   + 25.25. Electric circuits
+ CHECK OF MALFUNCTIONS






25.8.1. Forward illumination of salon

Early models

PERFORMANCE ORDER
1. Using an edge of a thin screw-driver, and being careful, remove a lamp of forward lighting and disconnect from it the electric socket.
2. For replacement of a bulb of internal lighting take a bulb from spring contacts. Establish a new bulb, having accurately fixed it in spring contacts.
3. For bulb replacement for reading press a bulb and in this situation turn it counter-clockwise. Establish a new lamp in a cartridge, press it and in this situation turn it clockwise. Establish a lamp of forward lighting into place.

Late models with lamps of an emergency condition of a seat belt

Removal of a lamp of forward internal lighting on later models

Arrangement of a lamp of internal lighting (And) and lamps for reading (In) on a lamp of forward lighting

Removal of a cover from a forward part of a lamp of internal lighting

For extraction of a bulb of an emergency condition of a seat belt simply pull a bulb on itself

PERFORMANCE ORDER
1. Using an edge of a thin screw-driver, and being careful, remove a lamp of forward lighting and disconnect from it the electric socket (see fig. Removal of a lamp of forward internal lighting on later models).
2. Remove a reflector and take the filament lamp from spring contacts (see fig. An arrangement of a lamp of internal lighting and a lamp for reading on a lamp of forward lighting). Establish a new bulb in spring contacts and then establish a reflector into place.
3. For lamp replacement for reading remove a reflector and, pressing a bulb and in this situation turning it counter-clockwise, take a bulb. Establish a new bulb in a cartridge, press it and in this situation turn a bulb clockwise, then establish a reflector into place.
4. For replacement of a lamp of an emergency condition of a seat belt uncover a forward part of a lamp, then having pulled on itself, take the corresponding lamp (see fig. Removal of a cover from a forward part of a lamp of internal lighting, For extraction of a bulb of an emergency condition of a seat belt simply pull a bulb on itself). Establish a new lamp, having simply pressed it into a cartridge and close a cover.
5. Connect to a lamp of forward lighting the electric socket and establish a lamp into place.