Mercedes W124

since 1985-1995 of release

Repair and car operation


W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
- 2. Maintenance (diesel engines)
   2.2. Periodicity of service
   2.3. Maintenance
   - 2.4. Each 9 000 km
      2.4.2. Check of elements of system of a being self-leveled back suspension bracket
      2.4.3. Check of level of oil in an automatic transmission
      2.4.4. Check of tightness of hoses and liquid effluence
      2.4.5. Check and replacement of an auxiliary driving belt
      2.4.6. Check of central air of air
      2.4.7. Check and adjustment of turns of idling
      2.4.8. Check of a forward suspension bracket and steering
      2.4.9. Shock-absorber check
      2.4.10. Check of a protective cover of a power shaft
      2.4.11. Check of forward brake shoes
      2.4.12. Check of back brake shoes
      2.4.13. Check of an exhaust system
      2.4.14. Check of level of oil in a mechanical transmission
      2.4.15. Check of level of oil in the main reverse gear
   + 2.5. Each 58 000 km
   2.6. Each 12 months
   2.7. Each 3 years
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






2.4.2. Check of elements of system of a being self-leveled back suspension bracket
GENERAL INFORMATION

Extraction щупа from a tank of system of a being self-leveled back suspension bracket

Liquid level in system of a being self-leveled back suspension bracket
 Liquid level should be in system of a being self-leveled back suspension bracket between MIN and MAX labels on щупе.

Below the works order on models with a body the Versatile person is stated.

PERFORMANCE ORDER
1. Establish the car on an equal horizontal platform and open a cowl. Check liquid level in system of a being self-leveled back suspension bracket on not loaded car.
2. Take щуп for measurement of level of liquid and, using pure rags, wipe with щупа liquid. Insert pure щуп into a tank and take it repeatedly. Check level of liquid which should be between MAX and MIN labels on щупе (see fig. Extraction щупа from a tank of system of a being self-leveled back suspension bracket, liquid Level in system of a being self-leveled back suspension bracket). If check of level of liquid is made in the loaded car, level of liquid can be lower than MIN label.
3. If it is necessary, add demanded amount of the specified liquid through an opening for щупа.