Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
- 2. Maintenance (diesel engines)
   2.2. Periodicity of service
   2.3. Maintenance
   - 2.4. Each 9 000 km
      2.4.2. Check of elements of system of a being self-leveled back suspension bracket
      2.4.3. Check of level of oil in an automatic transmission
      2.4.4. Check of tightness of hoses and liquid effluence
      2.4.5. Check and replacement of an auxiliary driving belt
      2.4.6. Check of central air of air
      2.4.7. Check and adjustment of turns of idling
      2.4.8. Check of a forward suspension bracket and steering
      2.4.9. Shock-absorber check
      2.4.10. Check of a protective cover of a power shaft
      2.4.11. Check of forward brake shoes
      2.4.12. Check of back brake shoes
      2.4.13. Check of an exhaust system
      2.4.14. Check of level of oil in a mechanical transmission
      2.4.15. Check of level of oil in the main reverse gear
   + 2.5. Each 58 000 km
   2.6. Each 12 months
   2.7. Each 3 years
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






2.4.3. Check of level of oil in an automatic transmission

GENERAL INFORMATION

Check of level of oil in an automatic transmission make on a heated-up transmission (oil 80 temperature ° C).

Extraction щупа for measurement of level of oil in an automatic transmission

Rags use for rubbing щупа measurements of level of oil in an automatic transmission

Arrangement of labels on щупе for measurement of level of oil in an automatic transmission

PERFORMANCE ORDER
1. Establish the car on an equal horizontal platform.
2. Start the engine on turns of idling and establish the selector lever in situation P and tighten the hand brake.
3. Release the lock lever, take щуп for measurement of level of oil from a transmission, wipe it and repeatedly establish on a place (see fig. Extraction щупа for measurement of level of oil in an automatic transmission, rags Use for rubbing щупа measurements of level of oil in an automatic transmission).
4. Take щуп for measurement of level of oil and check that level of oil is between MIN and MAX labels (see fig. An arrangement of labels on щупе for measurement of level of oil in an automatic transmission).
5. If level of oil is lower than MIN label, add oil through an opening for щупа.
6. If there is a need often to add oil, that, means, leak which it is necessary to find and eliminate takes place until it did not lead to serious consequences.