Mercedes W124

since 1985-1995 of release

Repair and car operation


W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
- 2. Maintenance (diesel engines)
   2.2. Periodicity of service
   2.3. Maintenance
   + 2.4. Each 9 000 km
   - 2.5. Each 58 000 km
      2.5.2. Replacement of the fuel filter
      2.5.3. Oil and filter replacement in an automatic transmission
      2.5.4. Check of wear of overlays of a disk of coupling
   2.6. Each 12 months
   2.7. Each 3 years
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS



цена мебельный щит из сосны.

2.5. Each 58 000 km

2.5.1. Replacement of a filtering element of the air filter

DIESEL ENGINES WITH THE TURBO-SUPERCHARGING

PERFORMANCE ORDER
1. Unscrew and remove fastening of a cover of the air filter.
2. Lift a cover of the air filter together with laying. Close an opening in the center of the basis of a casing of the air filter for prevention of hit of dirt in a measuring instrument of a stream of air or a turbonagnetatel.
3. Take filtering element of the air filter.
4. Clear an internal surface of a casing of the air filter.
5. Establish a new filtering element.
6. Establish laying and a cover and fix it nuts.

THE DIESEL ENGINE WITHOUT THE TURBO-SUPERCHARGING

PERFORMANCE ORDER
1. Weaken a collar and remove an air inlet pipe from a forward part of the air filter.
2. Disconnect spring clips and uncover a casing of the air filter.
3. Take filtering element from a casing of the air filter.
4. Clear an internal surface of a casing of the air filter.
5. Establish in a casing of the air filter a new filtering element.
6. Establish a cover of the air filter and fix it spring clips.
7. Connect an air inlet pipe to a forward part of a casing of the air filter and fix it a collar.