Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
- 7. Major maintenance of engines
   7.2. General information
   7.3. Recommendations about engine removal
   7.4. Removal and installation of 4-cylinder petrol engines
   7.5. Removal and installation of 6-cylinder petrol engines
   7.6. Removal and installation of diesel engines
   7.7. Sequence of dismantling of the engine
   + 7.8. Analysis of a head of the block of cylinders
   + 7.9. Assembly of a head of the block of cylinders
   7.10. Removal of pistons with rods
   7.11. Removal of a cranked shaft
   7.12. Block of cylinders of the engine
   7.13. Pistons and rods
   7.14. Cranked shaft
   7.15. Survey of radical and shatunny bearings
   7.16. Engine balance of assembly at major maintenance
   7.17. Installation of piston rings
   7.18. Installation of a cranked shaft
   7.19. Check of a working gap of radical bearings
   7.20. Installation of a cranked shaft
   + 7.21. Installation of pistons with rods
   7.22. Engine start after major maintenance
+ COOLING SYSTEM
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS






7.3. Recommendations about engine removal

GENERAL INFORMATION

On all models the power unit consisting of the engine and a transmission, acts in film up from a motor compartment.

If you decided to remove the engine for repair, some preparations should be made.

The paramount importance has a choice of a venue of works, for providing space for service and storage of spare parts. It is desirable to do it at autostation or in garage with an equal horizontal floor with a pure firm covering.

Before removal of the engine wash up the engine and a motor compartment. Removal of the engine needs the load-lifting mechanism allowing safely to lift the power unit.

If you remove the engine for the first time, it is necessary to invite the skilled expert. Besides, there are many cases when one person cannot execute at the same time all actions at engine removal.