Mercedes W124

since 1985-1995 of release

Repair and car operation



W124 Mercedes
+ Governing bodies and control devices
+ MAINTENANCE
+ 2. Maintenance (diesel engines)
+ ENGINE
+ 4. Repair of 6-cylinder petrol SOHC engines
+ 5. Repair of 6-cylinder petrol DOHC engines
+ 6. Repair of the diesel engine established in the car
+ 7. Major maintenance of engines
- COOLING SYSTEM
   8.2. General information
   8.3. Hoses of system of cooling
   8.4. Radiator
   8.5. Thermostat
   + 8.6. Radiator fan
   8.7. Electric sensors
   + 8.8. Water pump
   8.9. Heating and ventilation system
   - 8.10. Elements of system of heating
      8.10.2. Heater radiator
      8.10.3. Control panel heater
      8.10.4. Engine of the fan of a heater
      8.10.5. Internal sensor of temperature
      8.10.6. Sensors of temperature of a radiator of a heater
      8.10.7. Switch of distribution of air and cable
      8.10.8. Regulator of size of an air stream
   8.11. Air central air
+ FUEL SYSTEM
+ 10. System of injection of BOSCH CIS-E fuel (KE-JETRONIC)
+ 11. System of injection of BOSCH HFM fuel
+ 12. Fuel system of diesel engines
+ 13. Fuel system of diesel engines
+ SYSTEMS OF START, IGNITION
+ 15. System of ignition of 4-cylinder petrol engines
+ 16. System of ignition of four-cylinder petrol engines
+ PRESTARTING HEATING
+ TRANSMISSION
+ 19. Mechanical transmission
+ 20. Automatic transmission
+ POWER SHAFTS
+ BRAKE SYSTEM
+ SUSPENSION BRACKET
+ BODY
+ ELECTRIC EQUIPMENT
+ CHECK OF MALFUNCTIONS



chevrolet lanos



8.10.8. Regulator of size of an air stream

Removal

PERFORMANCE ORDER
1. Remove the control unit a heater.
2. Remove an arm of fastening of a regulator from the console.
3. Remove the furnish panel under a steering column.
4. Under the dashboard remove a management cable from the lever at the basis of a heater and take a cable from fastening brackets.
5. Move a regulator of size of an air stream to the right, take the block of a regulator and under a back part of a regulator disconnect the electric socket.
6. Take the switch from the console, stretching a management cable via the heater block.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.